Whether it's a slow leak that's been eating your subfloor for weeks or a flooded basement at 2am, our Irwin crews are already moving. We dispatch Irwin units carrying industrial extraction pumps, air movers, and commercial dehumidifiers already loaded on the truck.

Hirex Water Damage started because homeowners in Irwin, OH kept telling us the same story: a national hotline picked up, put them on hold, and then subcontracted the job out to whoever was cheapest and closest. Every technician on our Irwin roster is a Hirex Water Damage employee, not a gig-app contractor pulled from a random directory.
Each lead tech holds an IICRC Water Restoration Technician certification and has personally handled clean-water, gray-water, and contaminated black-water losses, so Burst Pipe Cleanup in Irwin isn't a side service we tacked on — it's the reason the company exists. We carry full general liability coverage and are licensed to operate throughout Irwin, OH, so you're protected from the moment our truck pulls into the driveway.
We keep a stocked warehouse inside Irwin, OH so equipment never has to be trucked in from another region, which is the difference between a 45-minute arrival and a next-day one.
Talk to a Irwin property manager who's lived through an overnight pipe failure and they'll tell you exactly why a crew that arrives already equipped matters — every extra minute is more water in the framing. That's the gap Hirex Water Damage was built to close, one Irwin call at a time.

The most expensive Irwin restoration jobs we run almost never started as a dramatic flood; they started as something small that got put off. Here's what tells us a property needs professional attention rather than a mop and a fan:
If any of that sounds familiar, don't wait for it to get worse — call our Irwin line and we'll tell you honestly whether it's a same-day emergency or something we can schedule.
Whether it's one bedroom carpet or an entire flooded commercial floor, our Irwin crews scale the response to match the loss — nothing gets a cookie-cutter response.
Our Irwin units run truck-mount extraction pumps that pull thousands of gallons per hour, cutting standing-water time from days to hours. Every extraction job includes moisture mapping so we know exactly which materials are still holding water once the visible flooding is gone.
Our drying plans use moisture meters and thermal imaging to target air movers exactly where hidden moisture is trapped, with daily drying logs so you can see the numbers improving, not just take our word for it.
On the residential side in Irwin, we handle the flood-cut, subfloor checks, and content pack-out so your home is ready to rebuild, with clear photo documentation at every stage for your insurance claim.
For commercial Irwin accounts, we assign a project lead, run crews after normal hours to reduce downtime, and bring equipment sized to the actual footprint — we know a flooded lobby or a leaking unit above tenants below has to move fast.
When a Irwin job involves sewage backup, our team suits up in full PPE, applies EPA-registered antimicrobials, and safely disposes of porous materials that can't be saved.
We apply antimicrobial treatment during every Irwin drying job specifically to head off mold before it starts, and we'll flag any area that needs deeper remediation.

You get a written estimate before any equipment runs, not a mystery total handed to you after the fact.
Our Irwin, OH warehouse keeps drying equipment close, which typically puts a Irwin tech at your door inside an hour.
We document everything with photos and moisture logs and work directly with your adjuster so you're not stuck translating restoration jargon.
If moisture readings aren't where they should be at the end of the job, we come back and keep drying at no extra charge.
Tell our Irwin dispatcher what's happening — we'll ask a few quick questions to send the right equipment on the first trip.
Our nearest available Irwin crew is dispatched immediately with truck-mount extraction gear on board.
Extraction happens immediately, followed by a moisture survey that tells us precisely where the drying equipment needs to go.
Daily moisture checks continue until every affected material reads dry, and you get a complete report at the end.

Our Irwin technicians use moisture meters at the start and the end of every job, and the final number has to hit the dry standard before we leave. If a callback shows lingering moisture within 30 days of a completed job, we return and correct it at no additional charge.
That's not a marketing line — it's written into every Irwin work order we issue. If a second visit is ever needed, it comes from the same crew that handled the original job whenever scheduling allows, since they already know the property and the readings we started from.

"Water heater blew at midnight and the Hirex Water Damage crew had extraction equipment running before 1am. Genuinely fast." — Danielle R.
"The team handled every conversation with my adjuster — I never had to explain what psychrometrics meant to anyone." — Marcus T.
"The drying logs they left behind actually made sense — I could see the numbers dropping every day until it was done." — Priya S.
"They worked overnight so our restaurant wasn't closed longer than it had to be. That mattered a lot to us." — Aaron W.
"They handled a blackwater situation in our basement without making me feel like it was a bigger disaster than it was." — Lena G.
"What they quoted up front is what I paid. No hidden equipment fees." — Sam O.
Local staging inside Irwin, OH typically gets a Irwin technician on-site inside an hour or two, depending on traffic and time of day.
Upfront, written pricing is standard on every Irwin job, not an add-on option.
Emergency extraction, structural drying, and sewage/contaminated water cleanup are all available 24/7 for Irwin properties.
We build our paperwork specifically to match what adjusters need and will speak with your insurer on your behalf.
We rely on moisture meters and psychrometric readings, not a guess, before signing off on a Irwin job as complete.
Yes, our Irwin crews are trained and equipped for Category 3 blackwater response, including PPE and antimicrobial treatment.
If it's safe, shut off the water source, move electronics and valuables away from the affected area, and avoid the space if standing water is near outlets.
We scale crews and equipment for commercial Irwin accounts and assign a dedicated project lead for anything beyond a single unit.
Drying time varies with material and how quickly extraction started, but 3 to 5 days is typical for most Irwin jobs.
Quick extraction and drying in Irwin significantly lowers mold risk, since spores need sustained moisture over roughly a day or two to establish.
We stand behind every Irwin job with a documented dry-standard guarantee and a 30-day callback policy.
See the zip codes and nearby cities listed below — our Irwin crews cover that full radius.
Our Irwin dispatch covers the full city plus a wide radius of surrounding zip codes, backed by additional crews staged throughout Irwin, OH for larger losses. If your address falls inside or near Irwin, a Hirex Water Damage crew can typically respond the same day.
— Embedded service-area map for Irwin, Irwin, OHReach our Irwin line directly and get a technician on the way today.
Call +1-844-234-5373